Project Dashboard LulzBot Mini 2 Mini 2 Tool Kit Workflow

1 Gather Materials

Materials Required

1x- [EL-MS0385] Preloaded/Tested 8GB SD Card
5x- [HD-MS0550] 90 mm Wiper Pad
1x- [TL-CS0117] Elmer's Glue Stick
1x- [TL-HD0008] Stainless Steel Pocket Rule Semiflexible
1x- [TL-HD0046] Pro Dental Pick (Probe)
1x- [TL-HD0048] Elmer's X-Acto No. 1 Precision Knife
1x- [TL-HD0049] 6" Deluxe Bent Stainless Steel Tweezers
1x- [TL-HD0050] 6" Long Nose Pliers
1x- [TL-HD0468] 13 pc Long Arm Ball Hex Key Wrench Set
1x- [TL-MS0568] Scotch Brite Maroon Pad, 2"x3"
1x- [TL-MS0572] Tool Bag w/ Lulzbot Logo

Gathered materials

2 Pack Right Side

Place the Stainless Steel Pocket Ruler [TL-HD0008], Pro Dental Pick [TL-HD0046], Elmer's X-Acto No. 1 Precision Knife [TL-HD0048], and 6" Deluxe Bent Stainless Steel Tweezers [TL-HD0049] under the mesh sleeve on the right side of the tool kit.

Then place the 13 pc Long Arm Ball Hex Key Wrench Set [TL-HD0468] under the right sleeve and the Elmer's Glue Stick [TL-CS0117] next to the 13 pc hex key set.

X-Acto knife, dental pick, tweezer, and pocket ruler in place under right mesh sleeve
Hex key set under mesh sleeve and Elmer's glue stick next to it

3 Pack Left Side

Place the Preloaded 8 GB SD card [EL-MS0385] under the mesh sleeve on the left side.

Then place the Scotch Brite Maroon Pad, 2"x3" [TL-MS0568] and 5x 90 mm Wiper Pads [HD-MS0550] under the left sleeve over the SD card, make sure the five wiper pads are packed in a bag.

Lastly take the 6" Long Nose Pliers [TL-HD0050] and slide it over the wiper pads and the Scotch Brite pad

SD card in place
Scotch Brite and wiper pads in place
Long nose pliers in place

4 Close Tool Kit

Make sure everything stays in place and close and zip the tool kit.

Closed and zipped tool kit
Done! Take me home