Project Dashboard TAZ 6 Bootloader Flashing TAZ6 Rambo Workflow

1 Connect ISCP

Connect the ICSP into the pin header labeled “ICSP”. Ensure proper orientation. ( see image- “ICSP connected”)

Connect the USB cable into the USBB port on the ICSP, Ensure the green light is on

ISCP Connected

2 Running shellscript

Open the computers terminal


 cd shared-j/devel/lulzbot/electronics/bootloader/bootloader-scripts/

to get to the directory



and run the shellscript.

A successful flash will display-

avrdude: verifying ...
avrdude: 1 bytes of lock verified

avrdude: safemode: lfuse reads as FF
avrdude: safemode: hfuse reads as D0
avrdude: safemode: efuse reads as FD
avrdude: safemode: Fuses OK (E:FD, H:D0, L:FF)

avrdude done.  Thank you.

2560 Success!!
Ctrl+C to quit any other key to program

3 Disconnecting and packaging RaMBo

After a successful flash, Disconnect the ICSP from the RMBo

Disconnect the USB from the ISCP

Place the flashed RMBo into a new Static Shield bag

4 Flashing another RaMBo

To flash another RMBo, repeat step 1. To run the shellscript, press the spacebar.

If a successful flash repeat step 3

Done! Take me home