Project Dashboard Mini v1.04 Supernut testing procedure Workflow

1 Gather tools and materials

You will need the following:

  • IMADA torque meter model I-80 or similar
  • Known good drive rod with printed coupler and philips head bit
  • Supernuts to test
required materials

2 Thread nut to be tested onto known-good driverod

Thread the nut onto the driverod as shown!

nut unthreaded
nut partially threaded
nut threaded

3 Put driverod jig into IMADA torque meter

Place the philips head bit into the torque meter

bit inserted

4 Slowly rotate supernut and read torque meter

turn the supernut on the driverod and read the torque value on the torque meter

rotate clockwise
read meter
Done! Take me home