Project Dashboard Packaging Tool Kits Workflow

1 Tool Kit Warning

Each printer will have a unique set of parts that will be included inside the documentation bag!

There are five different tool Kits:

  1. Mini 2 Tool Kit
  2. TAZ Pro and Pro XT Tool Kit
  3. TAZ Pro S Tool Kit
  4. TAZ Workhorse Tool Kit
  5. 289 & 747 TAZ SideKick Tool Kit

2 Mini 2 Tool Kit Variant

1x- [EL-MS0578] SD Card
5x- [HD-MS0550] Synthetic Felt Backing
1x- [SH-PG0002] 3 x 4" 2 Mil Reclosable Bag

Mini 2 Tool Kit

3 TAZ Pro and Pro XT Tool Kit Variant

1x- [EL-MS0579] Flash Drive
1x- [HD-MS0523] Connector Retention Clip
5x- [HD-MS0531] Scotch Brite Cleansing Pad
1x- [SH-PG0005] 3 x 5" 2 Mil Reclosable Bag

TAZ Pro and Pro XT

4 TAZ Pro S Tool Kit Variant

1x- [EL-MS0579] Flash Drive
1x- [HD-MS0523] Connector Retention Clip
5x- [HD-MS0550] Synthetic Felt Backing
1x- [SH-PG0002] 3 x 4" 2 Mil Reclosable Bag

TAZ Pro S

5 TAZ Workhorse Tool Kit Variant

1x- [EL-MS0578] SD Card
1x- [HD-MS0523] Connector Retention Clip
5x- [HD-MS0550] Synthetic Felt Backing
1x- [SH-PG0002] 3 x 4" 2 Mil Reclosable Bag

TAZ Workhorse

6 289 & 747 TAZ SideKick Tool Kit Variant

1x- [EL-MS0578] SD Card 1x- [HD-MS0523] Connector Retention Clip

289 & 747 TAZ SideKick

7 Gather Materials

1x- [TL-CS0117] Elmer's Glue Stick
1x- [TL-HD0008] Stainless Steel Pocket Rule
1x- [TL-HD0468] 13 PC Hex Key Wrench Set
1x- [TL-HD0588] Print Bed Scraper
1x- [TL-HD0589] Micro Cutting Pliers
1x- [TL-MS0568] Scotch Brite Maroon Pad, 2"x3"
1x- [TL-MS0572] LulzBot Tool Bag

Gather Materials

8 Pack Right Side

Place the Stainless Steel Pocket Ruler [TL-HD0008] under the mesh pocket on the right side of the tool kit.

Then place the 13 PC Hex Key Wrench Set [TL-HD0468] under the right sleeve and the Elmer's Glue Stick [TL-CS0117] next to the 13 pc hex key set.

Place the stainless steal ruler inside the mesh pocket
Slide the 13 pc hex key wrench set over the ruler and place the glue stick next to the wrench set

9 Pack Left Side

Place the Micro Cutting Pliers [TL-HD0589] under the mesh pocket on the left side of the tool kit. Make sure the cutting pliers is touching the top side of the tool kit leaving a gab at the bottom.

Then slide the Scotch Brite Maroon Pad, 2"x3" [TL-MS0568] under the mesh pocket touching the bottom side of the tool kit.

Place the micro cutting pliers under the mesh pocket on the left side
Slide the scotch brite maroon pad under the mesh pocket

10 Close Tool Kit

Make sure everything stays in place and close and zip the tool kit.

Leave the Print Bed Scraper outside of the tool kit, the tool kit will not close properly with the scraper inside.

Closed and zipped tool kit, leave print bed scraper outside
Done! Take me home