Open HardwareAssembly Instructions
Guides for installation and assembly of the LulzBot line of products made by FAME 3D LLC.
Guides for installation and assembly of the LulzBot line of products made by FAME 3D LLC.
1A) Grab 11x SH-PG0001 and fill one bag with each part:
- HD-BT0049 x4
- HD-BT0157 x12
- HD-BT0158 x4
- HD-NT0044 x10
- HD-NT0053 x 23
- HD-NT0055 x11
- HD-NT0057 x4
- HD-WA0038 x12
- HD-WA0040 x68
- PP-GP0409 x4
- PP-GP0879 x4
1B) Grab 7x SH-PG0005 and fill one bag with each part:
- HD-BT0073 x56
- PP-GP0874 x4
- PP-GP0875 x4
- PP-GP0876 x4
- PP-GP0877 x4
- PP-GP0878 x3
- PP-GP0970 x2
1C) Grab 1x SH-PG0111 and fill it with all SH-PG0001 and SH-PG0005 bags. Grab 1x DC-MS0134 and place it inside.
2A) Grab 6 sheets of SH-PG0160 (Bubble Wrap) and lay it flat on the table. Then start to stack parts in order and as shown:
1) PP-FP0256 x2
2) PP-FP0254 x2
3) PP-FP0255 x2
4) PP-FP0289 x1
5) PP-FP0288 x1
6) PP-FP0257 x2
7) PP-FP0253 x1
8) PP-FP0252 x1
2B) Grab 6x PP-GP0872 and tape them to PP-FP0257 as shown.
2C) Grab 2x PP-GP0873 and tape them to PP-FP0252 as shown.
2D) Grab 4x HD-EX0117 and place where shown.
2E) Grab 2x HD-EX0114 and place where shown.
2F) Grab 4x HD-EX0116 and place where shown.
2G) Grab the Hardware Bag and lay it as flat as possible where shown.
2H) Wrap the bubble around all the parts tight and use packing tape to hold it.
2I) Grab 6 sheets of SH-0160 (Bubble Wrap) and use them to wrap up everything in the perpendicular direction from before.
3A) Grab 1x SH-BX0510. Then fold and seal the bottom using three SH-PG0131 x28” pieces of tape.
3B) Place two 3 sheets of SH-PG0160 (Bubble Wrap) in perpendicular directions in the box.
3C) Place the package of parts in the box.
3D) Place 2 sheets of SH-PG0160 (Bubble Wrap) on top.
3E) Close the box and seal using three SH-PG0131 x28” pieces of tape.
3F) Place 1x SH-PG0019 for KT-MS0101 on the side of the box where shown.
3G) Place 1x DC-LB0174 on the side of the box where shown.
