Project Dashboard Accessories and Upgrades LulzBot TAZ Flexystruder Tool Head v2 Installation LulzBot TAZ 5 Workflow

1 Congratulations!

You just upgraded your LulzBot desktop 3D printer with a Flexystruder Tool Head v2. After following this Quick Start Guide, your LulzBot 3D printer will be more capable than ever. Let's get started!

LulzBot TAZ Flexystruder v2 Tool Head

2 Included materials

Included Materials

  • Flexystruder v2 Tool Head
  • LulzBot Green Ninjaflex Sample Filament
  • Glue stick (Elmer's® or UHU® brand)
Included materials

3 Items required

You will also need

  • LulzBot TAZ 5 desktop 3D printer
  • USB cable, included with your LulzBot TAZ
  • GNU/Linux, Mac OS X, or Windows-based computer
  • 2.5 mm hex key or driver
Items required

4 Position the Z axis

Let's get started!

Power on your LulzBot TAZ 3D printer.

Raise the Z axis by using the Graphical LCD controller to print the calibration/z_shipping_235.gcode file found on the SD card included with your LulzBot 3D printer. The file can also be downloaded from here. To save the file, right click on the link and select Save as or Save target as.

Alternatively, you can also manually move the Z axis up by using the Graphical LCD controller by navigating to: Prepare > Move Axis > 1.0 > Z axis > Change the value to at least 200.

Raise Z axis

5 Power Off Your LulzBot 3D Printer

Completely power off your LulzBot 3D printer and unplug the power cord and USB cable before proceeding.

Power off yout TAZ 3D printer, disconnect the USB cable

6 Remove Existing Tool Head

Unplug the connectors for your current tool head. With one hand support the tool head and unscrew the single M3 screw securing it to the X axis carriage, and remove it from the printer by lifting the tool head up.

Remove original tool head

7 Record Flexystruder ESteps

Your new Flexystruder has a different Extruder Steps Per Unit (ESteps) value than the standard TAZ tool head. This important new value can be found on a sticker on the back of the extruder.

Record this value before continuing.

Record Flexystruder ESteps

8 Mount New Tool Head

Install the Flexystruder Tool Head v2 by seating it on the X axis carriage and secure it with the M3 screw that you removed in the previous step.

Mount new tool head

9 Plug In Tool Head

Connect the two 16 pin connectors, making sure to match them based on the pins in the connector.

Verify the connectors are appropriately connected before proceeding.

Plug in tool head

10 Install Or Update Cura LulzBot Edition

Cura LulzBot Edition is available from:

http://LulzBot.com/Cura.

Install Cura LulzBot Edition if not already installed on your computer.

If Cura has already been installed, update to the latest version by installing it from the link above, as it has preset machine configuration profiles.

Plug in your LulzBot TAZ 3D printer to the power supply and power on your 3D printer.

Once powered on, connect your 3D printer to your computer using the USB cable.

Open Cura LulzBot Edition.

Cura LulzBot Edition

11 Setup New Tool Head In Cura

In Cura:

  • Select Machine > LulzBot TAZ

  • Select Machine > Machine settings

In the Machine settings window:

  • Select Change Tool Head
Select LulzBot TAZ 5
Open Machine settings
Change tool head

12 Choose Your Tool Head

Select v2 (LulzBot Hexagon).

Select Flexystruder v2.

Install the Flexystruder firmware by selecting Flash the firmware.

Once the firmware has been loaded close the tool head selection wizard.

Select v2 (LulzBot Hexagon)
Select Flexystruder v2
Install Flexystruder firmware

13 Update your Flexystruder E-steps

Press the Finish button to exit the tool head wizard.

Use the Graphical LCD controller to clear the EEPROM settings from the previous firmware.

Navigate to: Configuration and select Restore Failsafe.

Scroll up and select Advanced settings > Esteps/mm to update the extruder steps per unit (E-steps or esteps) to get the best performance from your Flexystruder Tool Head.

Update the e-steps with the recorded value found on your Flexystruder, recorded in step 7.

Use the control knob on the Graphical LCD controller to adjust the value.

Once set, back out of the menu entries until you can select Store Memory.

Select Store Memory to save the adjusted Extruder Esteps/mm.

Close tool head wizard

14 Load Key Chain Model

In Cura LulzBot Edition, load the key chain test print. The model can be downloaded here:

keychain.stl

Locate the included glue stick.

SemiFlex and NinjaFlex will adhere exceedingly well to the print surface. To aid part removal, evenly apply glue stick to the print surface.

Failure to do so may cause the printed flexible part to bond permanently to the PEI print surface.

Key chain loaded
Apply glue stick

15 Select Material And Quickprint Profile

Under Material select NinjaFlex (Fenner Drives).

Choose the Standard quickprint profile.

Remove the SD Card from the TAZ 5 Graphical LCD controller (GLCD) and install it into your computer.

Save the sliced model to the SD Card by pressing the Save GCODE button.

Select material and save GCODE

16 Prepare Your 3D Printer

SemiFlex and NinjaFlex will adhere exceedingly well to the print surface. To aid part removal, evenly apply glue stick to the print surface.

Failure to do so may cause the printed flexible part to bond permanently to the PEI print surface.

Turn on the hot end through the GLCD by navigating to Temperature > Ninja.

You are almost ready to print!

Apply glue stick to the print surface
On the GLCD select Temperature
Select NINJA

17 Remove filament

Your Flexystruder tool head was calibrated before leaving our factory. Once the printer is up to extrusion temperature of 220°C, remove the filament.

Through your GLCD, navigate to Prepare and select Motors Off. Rotate the large gear by hand clockwise to remove the filament from the hot end.

Remove filament

18 Load And Extrude Filament

Load the NinjaFlex filament sample into the extruder body.

Slowly rotate the large gear by hand, counter-clockwise, to feed the filament into the hot end.

Once your 3D printer is at the appropriate extrusion temperature of 220°C, finish loading the filament by rotating the large gear counter-clockwise until the extruded filament underneath the hot end nozzle transitions to LulzBot green.

Load flexible filament sample

19 Your First Flexystruder Print

On the Graphical LCD controller, select Print from SD and navigate to the keychain.gcode file. Select the file to begin the 3D print.

Your LulzBot TAZ 3D printer will automatically do the following:

  • Home each axis.
  • Once the homing procedure has been completed, your 3D print will begin!
Printed flexible key chain

20 Remove Key Chain Once Cool

After the key chain has been printed the tool head will move away from the completed model.

The bed will move forward once the printer cools to the recommended part removal temperature.

Remove your printed object by using the blue-handled pry tool to lift the part from the bed.

To switch back to the original tool head, follow the same steps outlined in this guide, except this time, select the Standard LulzBot TAZ tool head and options.

Have questions, or ideas? Share them with community by joining our user forum at Forum.LulzBot.com

Remove skirt
Lift part off bed
Pull key chain off the print surface
Your first flexible 3D printed key chain
Done! Take me home