Open HardwareAssembly Instructions
Guides for installation and assembly of the LulzBot line of products made by FAME 3D LLC.
Guides for installation and assembly of the LulzBot line of products made by FAME 3D LLC.
1x [AS-TH0087] Asteroid 285 (1.2mm), LGX Ace Assembly
1x [DC-LB0012] White 7 x 1/2 x 2 laser label
1x [DC-LB0160] Tool Head Serial Number Sticker, Matte Silver, 1" x 0.5", Thermal
1x [DC-LB0228] ASTEROID Tool Head LABEL, Front
1x [DC-LB0302] ASTEROID TOOL HEAD LABEL, BACK
1x [DC-MS0054] Firmware Update Warning Cards
1x [DC-MS0060] CONGRATULATIONS!- Accessory Instruction Card, V1.2
1x [HD-MS0058] Wire Tie, 8" Black, pk 1000
900mm [HD-TB0009] Hard Polypropylene Plastic Tubing 4 mm ID 6 mm OD
1x [PP-GP0653] Feed Tube Spinner 2.85mm_TAZ SideKick
1x [SH-BX0080] 7 X 7 X 4 White Indestructo Box
1x [SH-PA0016] 8 X 8 Convoluted Foam 2 pc Set
812.8mm [SH-PG0131] Custom Printed LulzBot White Tape
2A) Turn on the tape machine and the heater. The heater should be on for 20-30 minutes before using.
2B) Cut a 900mm piece of HD-TB0009 and place PP-GP0653 on one end securing it with HD-MS0058. Use the zip tie puller to ensure it's secure.
2C) Fold up SH-BX0080 and place DC-LB0012 where shown.
2D) Place one half of SH-PA0016 in the box with the tube on top.
2E) Place AS-TH0087 in the box.
2F) Place the other half of SH-PA0016 in the box with DC-MS0054 and DC-MS0060 on top and close up the box.
2G) With the heater warmed up, cut a 10in. (Long Length if in Tool Heads) piece of SH-PG0131 and place on each side of the box.
2H) Cut a 12in. piece of SH-PG0131 and place across the front of the box.
2I) Place DC-LB0302 on the back of the box.
2J) Place DC-LB0228 on the front of the box.
2K) Place DC-LB0160 on DC-LB0228 where shown.
