Guides for installation and assembly of the LulzBot line of products made by FAME 3D LLC.
RAMBo Windows Drivers AO-101 - TAZ & KITTAZ users (Not needed if you have an AO-100).
Save the file and make sure to note where the file has been saved.
Use your file exporer to navigate to the download location if neccessary.
The AO-101 uses the RAMBo board for the electronics package. The driver for the AO-101 and the TAZ are the same.
Download the zip archive found here: RAMBo Driver
Save the file to your desktop or other memorable location. Then extract the files using 7-zip or any other archive manager.
Power on your 3D printer, and plug it into your computer using the supplied USB cable.
In the new window that opens, on the left hand pane under Computer Management open System Tools and select Device Manager.
In the center of the window, right click over the RAMBo entry and select Update Driver Software. If you have having difficulty finding this line, look for the yellow triangle icon.
You will be presented with a screen with two options. Select Browse my computer for driver software.
Use the file tree and select the folder containing the driver you downloaded at the beginning of this guide. In our example we used the Desktop.
Click Next and the process should start. You may be presented with a prompt asking for permission to install the driver. Select Install to continue. It should then finish the process and refresh the Device Manager window.
If you have any difficulty, contact LulzBot support at Support@LulzBot.com