Project Dashboard TAZ 6 Tool kit Preparation Workflow

1 Gather Materials & Form SubKit

AS-PK0029 consists of:
1x- [AS-PK0010] 90 mm wiper pad set 5 pack
1x- [AS-PK0027] Clam knife with label
1x- [TL-CS0117] Elmer's Glue Sticks
1x- [TL-HD0048] Elmer's X-Acto No. 1 Precision Knife - Aluminum
1x- [TL-HD0050] Stanley 6" Long Nose Pliers
1x- [TL-HD0468] 7 pc Long Arm Ball Hex Key Wrench Set (Metric) - Red
2x- [TL-CS0255] Scotch Brite Maroon Pad, 2"X 3"
1x- [TL-MS0343] Bright Travels Hanging Utility Kit - TAZ Tool Bag with LulzBot Green Logo

1x- [AS-PK0030] Tool Sub kit:

  • 1x- [TL-HD0008] Stainless Steel Pocket Rule Semiflexible, Metric Grads, 150 mm Length
  • 1x- [TL-HD0049] 6" Deluxe Bent Stainless Steel Tweezers with Serrated Teeth and Safety Cap
  • 1x- [TL-HD0046] PRO DENTAL PICK (PROBE) (DP-19) M S V - in a protective sleeve or with a safety cap

Insert the Ruler [TL-HD0008] and the Tweezers [TL-HD0049] into the sleeve accompanying the Dental Pick [TL-HD0046]. This creates AS-PK0030 Tool Sub Kit.

Dental Pick w/ Sleeve, Ruler, and Tweezers
Ruler & Tweezers in sleeve w/ Dental Pick

2 Open Toolkit Bag

Open the Tool Kit Bag [TL-MS0343] and use the hook inside to hang the bag on a rack to be filled.

Bag Hanging on Rack

3 Insert Wiper Pad Set

Place the Wiper Pad Set [AS-PK0010] into the mesh pocket at the top as pictured; close the zipper.

Insert wiper pad set into top mesh pocket
Close the zipper

4 Fill Large Bottom Pocket

Place the Scotch Brite Pads [TL-CS0255] into the large bottom pocket of the Toolkit Bag [TL-MS0343]

Place the X-Acto Knife [TL-HD0048] into the large bottom pocket of the Toolkit Bag [TL-MS0343]

Place the Clam Knife [AS-PK0027] into the large bottom pocket of the Toolkit Bag [TL-MS0343] with the "Sharp!" label facing towards you.

Place scotch-brite pads in large bottom pocket
Place X-Acto Knife in Large Bottom Pocket
X-Acto Knife in large bottom pocket
Place clam knife in large bottom pocket WITH LABEL FACING OUT
Clam Knife placed in large bottom pocket SEE LABEL?

5 Fill Mesh Pocket

Place Tool Sub Kit [AS-PK0030] , (containing: tweezers, dental pick, metric ruler), into the mesh pouch in front of the clam knife.

Place the Allen Wrench Set [TL-HD0468] into the front mesh pocket with the logo facing towards you.

Place the Pliers [TL-HD0050] into the front mesh pocket and close the zipper.

Place AS-PK0030 Tool Sub Kit into lower front mesh pocket
Tool Subkit placed in lower front mesh pocket
Place Allen Wrench Set in lower front mesh pocket
Allen Wrench Set placed in lower front mesh pocket
Place pliers in lower front mesh pocket
Pliers placed in lower front mesh pocket
Close the Zipper

6 Insert GlueStick & Close the Bag

Place one glue stick [TL-CS0117] in the large pocket.

Unhook the bag, and close the outer zipper.

Insert glue stick in large bottom pocket
glue stick in place
Close the outer zipper, finished product should look like this:
Done! Take me home