Guides for installation and assembly of the LulzBot line of products made by FAME 3D LLC.
Follow the instructions below to install the Universal Mount Adapter onto your LulzBot TAZ 6 and TAZ 5 to take advantage of the latest generation of LulzBot Tool Heads:
SL Tool Head | Small Layer | 0.25 mm
SE Tool Head | Single Extruder | 0.5 mm
HS Tool Head | Hardened Steel | 0.8 mm
HS+ Tool Head | Hardened Steel | 1.2 mm
Using the 2.5 mm hex key, unscrew the M3 socket head screw securing the tool head to the X-axis carriage. Ensure that you are holding the tool head to prevent it from falling onto the bed after the screw has been removed.
Remove the tool head from the printer by lifting the tool head away from the printer.
There will be additional set up for the specific tool head you are mounting. Please continue using the specific tool head OHAI listed below.