Power on the LulzBot Pro 3D Printer. This will automatically move the X-axis gantry to the top of the printer.
Home the 3D printer by using the LCD touch screen. Press Menu, then Auto Home.
Adjust the position of the tool head using the LCD touch screen menu so that is about 200 mm above the print bed and close to the middle of the X-axis.
Turn the printer so that the back of the printer can be easily accessed, then unplug the 3 pin connections from each side of the tool head carriage.
Unplug the large connection from the left side (when viewed from behind) of the tool head carriage.
Unplug the remaining large connection from the tool itself, leaving the wiring in place to plug into the new accessory tool head.
Install the latest version of Cura LulzBot Edition. It is important to have the LulzBot Edition of Cura, as it has preset machine configuration profiles built into it.
Go to LulzBot.com/Cura to install Cura LulzBot Edition.
Plug in your LulzBot TAZ Pro 3D printer to the power supply and power on your 3D printer.
Once powered on, connect your 3D printer to your computer using the USB cable.
Open Cura LulzBot Edition.
Using the LCD touchscreen press Menu, then Change Filament.
On the Change Filament screen, press 180C (PLA). When the tool head has reached the target temperature, press Unload Continuous.
Note: PLA is used during quality assurance testing. When switching tool heads in the future, be sure to match the temperature to the filament that was previously used.
Once filament stops retracting remove it from the tool head.
You've now finished installation and are ready to start printing! Try performing a test print, such as the Rock2pus.
If you encounter issues please contact Technical Support by emailing Support@LulzBot.com, or by calling +1-970-377-1111.