Project Dashboard TAZ 3 X Carriage Assembly, TAZ KT-CP0030 Workflow

1 Gather parts and tools for X carriage assembly

  • Components:

    • X carriage with inserts
    • X carriage guide
    • Double bearing holder with bearings
    • Single bearing holder
    • M3 x 12 SHCS
    • M3 Washer
  • Tools:

    • 2.5mm Allen Driver
2.5mm allen driver

2 Install bearing holders

Install the double bearing holder and single bearing holder using M3 x 12 SHCS and M3 Washers.
Take note of the double bearing holder orientation. The end with the step must be in the correct location.
Do not tighten the screws all the way down. The bearings will be adjusted later and must wiggle at this step.

Bearing holders and parts
Bearing holders assembled

3 Install X carriage guide

Using 4x M3 x 12 SHCS and M3 Washers. Install the X carriage guide as shown.
Tighten bolts all the way down.

X carriage guide with parts
X carriage guide installed
Done! Take me home