The following projects are not associated to any product groups.
How to assemble a Budashnozzle 2.0c hot end.
This is how to build a dual extruder print head. enjoy!
Dual Extruder Tool Head v2 calibration guide
How to build a flexystruder
Instructions for assembling the LCD case.
This guide will take you through the replacement of worn or damaged wiper pad mounts.
Installation instructions for the LulzBot TAZ Dual Extruder Tool Head v1 on the LulzBot TAZ 5
Instructions for assembling the Juniper print head(all metal hot end)
How to Build .35mm, .5mm, and .6mm Hotends for 3mm filament LulzBot Tool heads
How to build a Flexystruder V2 body assembly
How to build Hexagon Hotend kit- Adapter Harness [EL-HR0072]
How to assemble the Hexagon Hotend Kit, LulzBot Edition, 3.0mm filament, nozzles .35mm, .5mm, .6mm
How to assemble a TAZ6.0 Extruder assembly
How to build a TAZ6.0 Frame subassembly
Instructions for how to build a TAZ6.0 bed plate subassembly for the Y Axis
Instructions for constructing a TAZ 6.0 frame final assembly from sub-assemblies
Directions for replacing TAZ Y axis motor
Directions for replacing X axis motor
Directions for replacing the Mini X axis motor
Directions for replacing a Mini Y Axis Motor
TAZ high volume extruder assembly instructions
TAZ Flexystruder v2 assembly instructions
Mini Flexystruder v2 assembly instructions
TAZ FlexyDually v2 assembly instructions
Instructions on how to package the retail extruders:
Soldering two 0603 package 100 pF capacitors to the z-min and zero sense circuits.
Instructions for removing a link from the Mini v1.04 (Gladiola) X-Axis Cable Chain
Instructions for how to replace bent or broken molex connectors